Surface Fixed
2. Assemble Upper 3 Base
sections using M8 x 16 mm
CSK screws provided (1.1)
Installation Instructions
Tubular Bells will arrive on
site pre assembled
Ground Surface
90 Kg
Pair Large Red
Beaters X1
Instrument
Components:
Tubular Bells
are pre-
assembled
Weight of heaviest part
30kg
(ALU Base)
Tubular Bells
Page 1 of 4
BS EN 1176
1.Locate Base in desired
location before attaching the
bells. Fix lower sections to
surface using pre drilled holes
provided. (Surface Anchors
Not supplied) Recommended
M10 Female Rawl Bolts or
chemical anchors
Spares available from
percussionplay.com
or from your
local distributor
3. Using the M10x 40 screw
and Barrel Nuts to attach
each of the 9 legs to the base
(1.2)
1.2
4. Make sure that all fixings
are tightly secured and thread
locking solution used if
required.
1.1
M10 Barrel Nut
x9
M10x40 Security Screw
x9
M8x16 CSK Security Screw
x34
Surface Fix
Components:
