Ground Fixed
5
. Once happy with location of
the Instrument,
fill
hole using
rapid hardening
concrete
. Be
sure to compact concrete
around legs and leave to dry
according to manufactures
guidelines, making sure to
leave jig in place until set.
2
. Use wooden jig to mark out
hole positions for each of the 3
legs in desired location upon
decision from customer. .
3
.
Excavate 3 holes
for the
Steel legs
250mm diameter by
400mm deep
.
(See GF Post
Installation Sheet)
4
. Locate (lower) legs into
holes making sure they are
vertical and level and use jig
to check positioning
1
. Attach M10x150 Bar and
Nuts to each of the 3 Legs.
(1.1) (See Assembly Guide)
400mm
Ground Surface
1110
Installation Instructions
(1.1)
Instrument
Components:
M10x150 Bolt
x6
M10 Nut
x12
Ground Fix
Components:
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
Papilio Bells
Page 1 of 3
Weight of heaviest part
13kg
(Notes)
BS EN 1176
36 Kg
M8 Barrel Nuts
x8
(1.1)
6
. Once concrete has set,
remove wooden jig and install
notes using M8 Barrel nuts
provided. Finally install
beaters using fixings provided.
(See Assembly Guide)
M6x20mm
Secure Screw
X8
Eye Straps
X4
Pair Small Red
Beaters X4
Metric Conversion:
250mm/ 10”
400mm/ 16”
1110mm/ 44”
1.5m/ 59”
CAUTION: Papilio
surface can get hot
in direct sunlight, if
possible install in
shaded areas.
Spares available form
percussionplay.com
or from your
local distributor
