Appendix A: Changing the RF Address
What you need:
• A pointed tool such as a pen tip or tooth pick.
The Wireless Mouse has a default radio frequency (RF) address of zero. The RF address
selection switch, located through a small window inside the battery compartment, sets the
radio frequency (RF) address for the Wireless Mouse. Possible address values are
zero through 15.
The RF address set on the Wireless Mouse must match the RF address set on the
PC Caster for the two devices to communicate. In most Avcast network installations, you
will not need to change the address of the PC Caster or the Wireless Mouse unless you
have more than one PC Caster installed in your home entertainment system or if you live
in close proximity to a neighbor who has a PC Caster installed in their home.
1. Open the battery compartment
cover on the back of the
Wireless Mouse and remove the
batteries to expose the
instrument to change the RF
address.
2.
Find the desired RF address
setting in table on the next
page.
3.
Use a pointed tool to move the
switches on the instrument to
change the RF address.
4.
Close the battery compartment.
5.
Set up the Wireless Keyboard.
Go to “Set Up the Wireless Mouse” on
page 3 for verification and calibration
instructions.
The Wireless Keyboard is now ready to use.
5
Wireless Mouse1.fm Page 5 Friday, July 21, 2000 10:48 AM