Pepwave Surf SF-200BG-X Installation Manual Download Page 4

Page: 4 / 4

How-to Document

PePWave Surf/PolePoint Outdoor Installation Guide

Surf/PolePoint Outdoor Installation Guide

Attach antenna(s) to the antenna port on the bottom side of the

Surf/PolePoint Outdoor unit.

** The picture below shows a PePWave PolePoint Outdoor. PePWave Surf

Outdoor only has one antenna connector **

5. Your PePWave Surf/PolePoint Outdoor can be
grounded if your pole is equipped with a grounding
cable.

Remove the screw and plate from the grounding
terminal on your Surf/PolePoint Outdoor unit.

Place the end of the grounding cable as shown in
the picture and fasten the grounding plate back
onto the Surf/PolePoint Outdoor unit.

6. Follow the instructions in the User Manual to set up the network.

PePWave Technical Support

In the event of issues during installation, please contact PePWave Technical Support

at [email protected] for assistance.

Summary of Contents for Surf SF-200BG-X

Page 1: ...rk cable using Power over Ethernet technology Users need to supply power to Surf PolePoint Outdoor via the specified Power over Ethernet 802 3af method Compatible Power over Ethernet units can be obta...

Page 2: ...1 x Installation Guide this document Installation 1 Fix the mounting unit to the pole you intend to use for your PePWave Surf PolePoint Outdoor unit With the pole in between attach the two semicircula...

Page 3: ...nt Outdoor i Unscrew the four bolts on the cover of the Surf PolePoint Outdoor unit and remove the cover thus exposing the inside iii Pass the cable through the Surf PolePoint Outdoor unit s cable con...

Page 4: ...ur PePWave Surf PolePoint Outdoor can be grounded if your pole is equipped with a grounding cable Remove the screw and plate from the grounding terminal on your Surf PolePoint Outdoor unit Place the e...