Pepperl+Fuchs WCS-PG410, Manual, Page: 13 / 41

2
0
2
0
-0
3
12
WCS-PG410
Installation
Connecting the Power Supply
Connect the operating voltage (10 VDC...30 VDC) to terminals 1 and 2 of the 4-pin plug X2 on
the interface module. In addition, note the label on the module.
The "Power" LED lights up green.
Terminal X2
Equipotential Bonding Connection
The connection to equipotential bonding occurs automatically when attaching to the DIN
mounting rail.
PROFIBUS DP Communication Interface
The communication interface can be found on the front of the housing in the form of a 9-pin D-
SUB socket.
1.
Connect the PROFIBUS connector to the D-SUB socket labeled "PROFIBUS."
2.
Tighten the lock screws on the connector using a screwdriver.
Terminal Description
1 UB+ (Pwr) Operating voltage for interface module/
operating voltage for WCS read head
2
0 V (Pwr) Ground for interface module/ground for WCS read head
3 not used is not used
4
not used is not used