22
3.2
VB8
CONFIGURATION
VB8
is factory set for RS232 Interface applications. The easiest way to configure
included with this manual. Otherwise you can configure the scanner using this
manual as follows:
To use this manual for configuration:
1)
Connect your
VB8
to a PC RS232 port according to the information in
chapter 2. Set the PC serial port to the
VB8
default RS232 communication
parameters.
2)
Using a Terminal Emulation Program send the Restore Default string to the
reader using the syntax described on the next page.
3)
Send all the necessary command strings according to your application's
requirements.
CAUTION
The WEDGE or PEN Emulation interface selections must be sent
last since they will cause the reader to no longer accept RS232
communications.
If working with the Wedge or Pen emulation interfaces, it is possible to return to the
RS232 connection by reading the code given below:
Return to RS232 Interface
i$1k
i$1k
i$1k
For WEDGE or PEN Emulation Users
VB8
is by using the Configuration utility program installed from the CD
Dat
e
of
issue
12/
2005
Par
t No.
193603
VB8-305
Software Configuration Strings