Pepperl+Fuchs OHV110-F228-R2, Manual, Page: 15 / 55

OHV110-F228-R2
Configuration
2
0
2
0
-0
9
15
4.3 Using Vision Configurator
To use Vision Configurator, you must activate Vision Configurator mode. This mode is used
exclusively for communication with Vision Configurator. If you are configuring the handheld
reader using control codes, you do not need to switch to Vision Configurator mode.
Starting Vision Configurator
1.
Start Vision Configurator.
2.
Select the user name Default (2) in the User section (1). There are no different user rights for
OHV handheld readers.
3.
Select Handheld (4) in the Device family section (3).
4.
Select the handheld reader (5), the connection type (6), and, where necessary, the connection
port (7) from the list.
5.
Select a language in the Language section (8).
6.
Read the control code using the handheld reader.
If the reading operation is successful, the function indicator on the handheld reader briefly
lights up green. Once Vision Configurator mode is activated, an audible signal is emitted
and the handheld reader vibrates. The handheld reader is in Vision Configurator mode and
the connection to Vision Configurator has been established.
7.
Click the "OK" button to go to the application window.
Note
Once configuration has been completed, switch back to keyboard mode; see chapter 4.1.1.
1
2
4
3
5
6 7
8
9