Pepperl+Fuchs OHV110-F228-R2, Manual, Page: 12 / 55

2
0
2
0
-0
9
12
OHV110-F228-R2
Configuration
4 Configuration
The handheld reader is configured using control codes (see chapter 4.4.1). The control codes
can be used to set the communication mode, general read mode settings, keyboard language,
and other settings of the handheld reader.
You can use the Vision Configurator software to adjust the following settings. For example, you
can modify the output string, edit the read result and assign a prefix or suffix to the read result,
generate user-defined control codes, and perform a firmware update.
4.1 Selecting the Operating Mode
The handheld reader has two different operating modes.
4.1.1 Keyboard Mode
Activating Keyboard Mode
Read the following code using the handheld reader.
Figure 4.1 Keyboard Mode
The function indicator on the handheld reader briefly lights up green.
Mode Description
Keyboard mode In keyboard mode, the handheld reader acts like a keyboard; see
chapter 4.1.1. The read codes are transferred to the PC as a combi-
nation of letters and digits.
Vision Configurator
mode Vision Configurator mode is used only for communication with Vision
Configurator; see chapter 4.1.2.
When the configuration is complete, return to the operating mode.
Note
Data is transferred using a US English keyboard layout by default.
If data is not transferred correctly in keyboard mode, modify the keyboard layout.