ODT-MAC400-* / ODT-MAC401-* / ODT-MAC403-*
Operation
21
6677
201
2-
05
19
The following four tabs can be found on the left-hand side of the display:
■
Settings
■
Communication
■
Gallery
■
Language
Various information is displayed in the central section
–
depending on which tab is
active.
On the right-hand side, various status information (such as the software/firmware
version, the MAC address, the number of reads, etc.) is displayed, as well as the
last image captured and the decoded information. On the right of the
Fuchs company logo there is a pictorial representation of a status LED.
This status LED lights up green when a device is connected. Otherwise it is red.
Activating live image capture
To activate live image capture, click the
Start Live Mode
button on the right-hand
side of the display screen.
The stationary reader starts to capture images. The captured images are
displayed in the results window. The decoded information is displayed beneath it
in a separate window.
Starting single image capture
On the right-hand side of the display screen, click on the button
Single image
.
Clicking the button triggers a single image capture.
Note!
By viewing the captured images on the operator interface during operation, the
image refresh rate reduces significantly.