ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD
Installation
20
4646
2010
-0
9
13
5.2.2
Connection via RS 232
Connecting RS 232 connecting cable to computer
1. Power off the computer.
2. Connect the RS 232 plug of the connecting cable to the RS 232 port of the computer.
3. Connect the low-voltage plug of the power-supply unit to the low-voltage jack of the
RS 232 connecting cable.
4. Connect the mains power plug of the power-supply unit to the mains power supply.
5. Power on the computer.
The handheld turns itself on automatically once you have turned the computer on.
6. Scan the code
RS 232 1 Way Mode
:
7. Scan the code
Save Settings
:
The handheld uses the following RS 232 factory settings:
•
RS 232 1 Way Mode
•
57600 baud
•
2 stop bits
•
8 data bits
•
No parity
Further RS 232 configuration options, see chapter 7.3.2.
