FAT LEVEL SENSOR KVF-F
Installation
23
6056
20
11-
04
EN - 9
EN
3.2
Mounting the KVF-F Fat Level Sensor
The sensor must be immersed a few centimeters when the liquid is at its normal
level (water zero line).
The exact immersion depth depends on
■
the type of grease interceptor,
■
its design,
■
its capacity
■
and the height of the maximum fat layer thickness.
The sensor must always be immersed in the liquid. The switching point of the
sensor is located between the insulated connecting piece and the top metal
section.
Figure 3.2
Mounting the fat level sensor
1
Fat level sensor KVF-F
A
Air
B
Fat, oil, grease (FOG)
C
Water
L
Water zero line
S
Sensor switching point
X
Alarm limit (maximum fat layer thickness)
L
S
B
C
A
1
X
