28
45
03
20
15
-09
9
Temperature Trip Amplifier KFD2-GU-(Ex)1
Device Configuration via Software
6
Device Configuration via Software
The device is parameterised using the
PACT
ware
TM
operating software.
The
PACT
ware
TM
operating software and the necessary device and communication DTMs can be
downloaded from our internet page www.pepperl-fuchs.com (product search, enter PACTware).
The manual "Installation and Configuration DTM Collection Conventional Interface Introduction" guides
you through the installation steps necessary to install the software. The manual can be found on our
Internet page www.pepperl-fuchs.com (product search, enter PACTware).
In the following, you will find the device-specific information for the device.
6.1 Connection Between Device and Computer
Connect the device and the computer using the K-ADP-USB adapter. This adapter can be ordered as
an accessory.
Connecting the device to the computer via the USB interface
1. Mount the device as described in the system description.
2. Connect the device to the power supply as described in the system description.
3. Connect the device to the PC via the adapter with USB interface K-ADP-USB.
Connection on the device: front programming socket
Connection on the PC: USB interface
> The hardware wizard is displayed. Read the note.
4. Follow the installation instructions and confirm the installation steps.
> The installation completion window is displayed.
5. Confirm the end of the installation with
Finish
.
> The interface driver is installed.
The hardware wizard is displayed only on initial installation or for an update.
Note
