2
018-
04
38
HART Multiplexer System KFD*-HM*-16
Configuration
6.4
Connecting with the Device
Connecting the Computer to the Device
1. Mount the device. See chapter 4.
2. Connect the device to the power supply.
3. Connect the computer and the device via an interface converter. See chapter 4.4.3.
4. Start
PACTware
as described in the manual "Installation and Configuration
Device Type Manager (DTM)".
The
PACTware
main window is displayed. See chapter 6.3.
Enabling Memory-Optimized Operation
In combination with the DTMs for the multiplexer master, we recommend enabling
the
Memory-optimized operation
option.
1. Open the menu
Extras > Options
.
2. Enable
Use memory-optimized project management
.
3. Confirm your selection with
OK
.
You have enabled the memory-optimized operation.
Summary of Contents for KFD Series
