2
0
2
0
-0
6
26
Commissioning for PROFINET
5.2.4
Configuring the IO-Link Channels
A preconfiguration of the I/O function is automatically used for slot 1 of the rack.
By default, all channels are preconfigured as "inactive." The configurations for the IO-Link
channels (C/Q or channel A/pin 4 of the IO port) in subslots 2 ... 9 (port 1 of the device corre-
sponds to subslot 2, etc.; port 8 of the device corresponds to subslot 9) can be defined as
required. The input and output addresses defined by the hardware manager can be changed.
Deleting an IO-Link Channel Configuration
1.
To delete an IO-Link channel, select the desired IO-Link channel in "Device View."
Figure 5.11
2.
Right-click on this entry.
The following menu appears:
