H-System – Isolated Barriers and Termination Boards for HIMA
Dismounting, Maintenance, and Repair
20
16-11
31
5.2
Termination Board Dismounting
Dismounting the Termination Boards
1. Loosen the mounting screws (3).
2. Remove the termination board (2) from the DIN mounting rail (1).
Figure 5.2
Termination board fixing
Warning!
Risk of short circuit
Working on live parts can cause injuries and can compromise the function and the
electrical safety of the device.
• Before working on the device, always disconnect the supply voltage.
• Connect the device to the supply voltage only after completion of the work.
1
DIN mounting rail
2
Termination board
3
Fastening screw
1
2
3
