H D 2 - D M - A / D M - A M
Application Engineering HD2-DM-A
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: G49 621 776-0 • USA +1 330 4253555 • Sin65 67799091 • Internet http://www.pepperl-fuchs.com
31
187630
10. Set option
Use memory-optimized project management
•
The Diagnostic Manager is now installed and ready to run.
5.5
Initial Commissiong of the Diagnostic Project
with
PACT
ware
TM
There are two different ways to commission a diagnostic project for the
first time:
•
Manually, to build up the diagnostic project before the diagnostic
bus is installed or if there is currently no active diagnostic bus.
•
Automatically, if the diagnostic bus is installed and active.
5.5.1
Approved Tags and Tag Values
The Tags of FDS, Port, Diagnostic Module, Segment or field device
must only contain the following characters and character classes (val-
ues between brackets): [0..9] [a..z] [A..Z] [-] [_] [$] [(] [)]. The Tags must
also not contain blanks or let be empty.
Tags must be unique within one level. This means that neither two FDS
ports nor two diagnostic devices beneath the same FDS port should be
named (tagged) the same.
•
Figure 5.8: Example for correct device tags
