Pepperl+Fuchs EX-DRAGON-M101, Technical Manual

Page: 68 / 164

Enter configuration Exit and save configuration
ExDragM101_V114_TH_E.doc/ 05/10/2009/ - 67 -
7.2.9 Special settings "2/5 Interleaved"
Programming model for setting "2/5 Interleaved" code without a check digit
Prerequisites: The scanner must already be connected to the port and started up (refer to the scanner manual).
This programming model only describes the setting for "2/5 Interleaved" code
without a check digit.
The barcode reader EXDLL6110 and EX-Dragon-M101 has "2/5 Interleaved" with a check digit activated as the
default setting, in other words if this code type exists without a check digit, it cannot be scanned or decoded
unless this setting is changed. The following steps are necessary to do this.
Read the following barcode commands one at a time:
1.) Enter configuration
2.) Disable all code families
3.) 2/5 Interleaved
4.) No check digit control
5.) Number of digits (useful content)
Please read from the table in chap. 14 (Single codes) 4 digits.
- First two digits = minimum code length
- Last two digits = maximum code length
6.) Save and exit configuration
END