2
022-
03
5
Safety
1.
This symbol indicates a paragraph with instructions. You are prompted to perform
an action or a sequence of actions.
1.3
Declaration of Conformity
All products were developed and manufactured under observance of the applica-
ble European standards and guidelines.
The product manufacturer, Fuchs GmbH, 68307 Mannheim, has a certi-
fied quality assurance system that conforms to ISO 9001.
1.4
Intended Use
The Ethernet Isolator is used to generate a galvanically isolated intrinsically safe
Ethernet signal from a non-intrinsically safe Ethernet signal. It may be used to lead
a standard Ethernet cable through a hazardous Zone 0 or Zone 1 area. For bridg-
ing the intrinsically Ethernet line through a hazardous area one Ethernet Isolator
has to be used at each end.
The device is designed for mounting on a 35 mm DIN mounting rail according to
EN 60715.
The device is constructed to satisfy the IP20 protection classification and must be
protected accordingly from adverse environmental such as water spray or dirt
exceeding the pollution severity level 2.
1.4.1
Marking
The modules are product-specifically marked with:
Note
A declaration of conformity can be requested from the manufacturer.
ISO
9001
EI-0D2-10Y-10B-LT
Fuchs SE
68301 Mannheim/Germany
Ethernet Isolator
EI-0D2-10Y-10B
PTB 07 ATEX 2025 X
II (1) GD [Ex ia] IIB
II 3 (1GD) G Ex nA [ia IIB] II T4
