PEP Modular Computers CP341, Manual

Page: 20 / 34

CP341 Introduction
ID 18845, Rev. 0102 Page 1 - 10 ® PEP Modular Computers GmbH
1.6 Specifications
Table 1-1: CP341 Specifications
CP341 Specification
Windows NT Compatibility Hardware design for WinNT network interface chip driver
(NIC) according to Windows and WinNT network driver
interface specification (NDIS)
Ethernet IEEE Standard 10 Mbit/s 802.3 and 100 Mbit/s 802.3u
Compact PCI Interface Peripheral board interface;
32-bit bus address/data/33 MHz
INT A/INT B support;
IDSEL hardware support;
CPCI data burst rate close to 132 MByte/s
1 4TE slot
Signalling Voltage 3.3V/5 V
Plug & Play Design No jumpers to be configurated
Remote Boot 2 x EEPROM/FLASH socket, 64 kByte max. each
Speed Configuration Auto-speed sensing/switching
Wake-up on LAN (Remote
Wake-up) Package detection logics reacting on incoming packages
Front-Panel Connector 2 x RJ-45, with 2-pair 5 UTP/STP cable pinout each
Mechanical Compliance IEEE 1101.10
Power Supply 3.3V/5 V, codes according to CPCI specification
Temperature Range
- Operation
- Storage
• 0° to +60°C (standard)
• -55° to +85°C
Operating Humidity 5 - 95% (non-condensing)
Vibrations IEC68-2-6 compliant
Shocks:
- Permanent Shocks
- Single Shocks
IEC68-2-29
IEC68-2-27
Board Dimensions Single-height Eurocard: 100 mm x 160 mm