Step 9
Check to ensure the build plate is level to the LCD screen.
It is very important to make sure the build plate and LCD screen
is clean of any debris for this next step. .
1). Ensure that the build plate is secure to the Z axis arm.
2). Get either a blank sheet of paper, or notebook paper.
3). Turn on the printer and go into Tools, Manual control, and
then home.
This will bring the build plate down to the LCD panel and we will check
to make sure that it is level to the LCD plate.
4). Take the paper and try and slide it under where the plate meets the
LCD panel all around. It should be that the paper should not slide
under the build plate.
