Instructions for FitBit® Surge Band replacement and installation of band adapter (cont.)
7.
Start two of the four screws removed in
Step
1
, in the Large end adapter, taking
care not to drive the screws all the way
into the adapter just yet.
8.
Place the Large end adapter (with screws
set in from Step-6) over the large end of
the adapter, and now drive the screws
into the display adapter and tighten
hand tight.
9.
Repeat steps 6 and 7 with the Small End
Adapter, on the small end of the display
assembly.
10.
You can now attach any Fitbit Blaze
Bands (sold separately on Amazon) to
your repaired Fitbit Surge.
