EN
38
4.9 Pressure pump
If the mains water pressure is
pump. If the pressure is less than 2 bar (200kPa), the machine may operate incorrectly. The
electrical connections for the pressure pump are shown in the electric circuit diagram. The water
connection to the pressure pu
necessary to use a pressure pump.
If the mains water pressure is less than 2 bar (200 kPa), please contact your supplier or the
manufacturer to request the PRESSURE PUMP KIT.
The pressure pump must only be installed by personnel authorised by the manufacturer,
and the manufacturer does not accept liability in the event of incorrect installation.
4.10 Recycling
The product packaging consists of:
•
A wooden pallet.
•
Cardboard.
•
A polypropylene band
•
Expanded polyethylene
All the packaging used around the machine can be recycled; The correct disposal of these products
will help to protect the environment. For further information regarding the recycling of these products,
please refer to the relevant office of the local body
current legislation.
5. USE AND MAINTENANCE INSTRUCTIONS
BEFORE STARTING THE APPLIANCE, PLEASE READ THE INSTRUCTIONS
THE APPLIANCE IS EXCLUSIVELY FOR PROFESSIONAL USE,
5.1 Operation
The steps required to optimise the operation of your dishwasher are shown below, with all the available
options.
5.1.1 Control panel symbols Fig.
A. Machine on/off button. (ON/OFF)
B. Short cycle button / Drainage button
C. Medium cycle button
D. Long cycle button
E. Boiler water temperature display
5.1.2 Switching on the machine
Before switching on the machine, check the following:
The mains switch must be on.
The water stop cock must be open.
There must be water in the mains network.
The corresponding filters must be in place.
The overflow should be mounted in place.
To switch on the machine just press the ON
If the mains water pressure is less than 2 bar (200 kPa), you have the option of installing a pressure
pump. If the pressure is less than 2 bar (200kPa), the machine may operate incorrectly. The
electrical connections for the pressure pump are shown in the electric circuit diagram. The water
connection to the pressure pump is shown in
Fig. 3.
If the machine is a version W machine, it is not
necessary to use a pressure pump.
If the mains water pressure is less than 2 bar (200 kPa), please contact your supplier or the
manufacturer to request the PRESSURE PUMP KIT.
pressure pump must only be installed by personnel authorised by the manufacturer,
and the manufacturer does not accept liability in the event of incorrect installation.
The product packaging consists of:
polypropylene band.
Expanded polyethylene.
All the packaging used around the machine can be recycled; The correct disposal of these products
will help to protect the environment. For further information regarding the recycling of these products,
please refer to the relevant office of the local body. Dispose of these materials in accordance with
AND MAINTENANCE INSTRUCTIONS
BEFORE STARTING THE APPLIANCE, PLEASE READ THE INSTRUCTIONS
CONTAINED IN THIS MANUAL CAREFULLY.
THE APPLIANCE IS EXCLUSIVELY FOR PROFESSIONAL USE,
ONLY BE USED BY QUALIFIED PERSONNEL.
The steps required to optimise the operation of your dishwasher are shown below, with all the available
Fig. 9
Machine on/off button. (ON/OFF)
F. Tank water temperature display
Short cycle button / Drainage button (60s)
G. Machine on pilot light
Medium cycle button (90s)
H. Machine working pilot
Long cycle button (180s)
I. Machine working pilot
Boiler water temperature display
J. Machine working pilot
machine
Before switching on the machine, check the following:
The mains switch must be on.
The water stop cock must be open.
There must be water in the mains network.
The corresponding filters must be in place.
overflow should be mounted in place.
To switch on the machine just press the ON-OFF button (A) once for 1.5 seconds.
the option of installing a pressure
pump. If the pressure is less than 2 bar (200kPa), the machine may operate incorrectly. The
electrical connections for the pressure pump are shown in the electric circuit diagram. The water
If the machine is a version W machine, it is not
If the mains water pressure is less than 2 bar (200 kPa), please contact your supplier or the
pressure pump must only be installed by personnel authorised by the manufacturer,
and the manufacturer does not accept liability in the event of incorrect installation.
All the packaging used around the machine can be recycled; The correct disposal of these products
will help to protect the environment. For further information regarding the recycling of these products,
Dispose of these materials in accordance with
BEFORE STARTING THE APPLIANCE, PLEASE READ THE INSTRUCTIONS
CONTAINED IN THIS MANUAL CAREFULLY.
THE APPLIANCE IS EXCLUSIVELY FOR PROFESSIONAL USE, AND SHOULD
ONLY BE USED BY QUALIFIED PERSONNEL.
The steps required to optimise the operation of your dishwasher are shown below, with all the available
temperature display
Machine on pilot light
Machine working pilot
Machine working pilot
working pilot
once for 1.5 seconds.
