32
BIOS Setup
On-chip Primary PCI
IDE/
On-chip Secondary PCI
IDE
Enabled: Use the on-board IDE
(default)
Disabled: Turn off the on-board IDE
IDE Primary Master PIO/
IDE Primary Slave PIO/
IDE Secondary Master
PIO/
IDE Secondary Slave PIO
Choose Auto (default) or mode 0~4.
Mode 0 is the slowest speed, and HDD
mode 4 is the fastest speed. For better
performance and stability, we suggest
you use the Auto setting to set the HDD
control timing.
USB Controller
Enabled it when you use USB device.
Onboard FDC Controller
Enabled: Use the on-board floppy
controller (default).
Disabled: Turn off the on-board floppy
controller.
Onboard Serial Port 1/
Onboard Serial Port 2
Choose serial port 1 & 2Õs I/O address.
Do no set port 1 & 2 to the same value
except for Disabled.
COM 1/3F8H
| COM3/3E8H
COM 2/2F8H
| COM4/2E8H
(default)
UR2 Mode
Choose Standard (default), IrDA1.0,
ASKIR, MIR 0.57M, MIR 1.15M, or
FIR to meet the specification of your
Infra Red device.
UR2 Duplex Mode
Choose Half or Full to meet the
specification of your Infra Red device.
This option appears only when you
choose everything but Standard in the
UR2 Mode function.
Onboard Parallel Port
Choose the printer I/O address:
378H/IRQ7 (default), 3BCH/IRQ7,
278H/IRQ5
