Pentax QS-1, Operation Manual

Page: 23 / 110

1
21
In
trodu
ctio
n
D
3
Power Saving
Enables saving battery power by setting the monitor display
to dim automatically if no operations are made within
5 seconds.
On -
Auto Power Off
Sets the time until the camera turns off automatically
if no operations are made for a certain period of time.
1min. p.28
Reset
Resets the settings of the direct keys and for the items
of the
A
menu,
C
menu,
B
menu,
D
menu, control
panel, and playback mode palette.
- p.15
D
4
Pixel Mapping
Maps out and corrects any defective pixels on the CMOS
sensor.
- p.84
Dust Removal Cleans the CMOS sensor by shaking it. - p.84
Format Formats a memory card. - p.29
Firmware Info/Options Displays the camera’s firmware version. - -
Custom Setting Menus
Menu Item Function Default Setting Page
E
1
1. Lens Shutter Options
Sets whether to use the lens shutter and/or the electronic
shutter.
Lens shutter only p.80
2. Sensitivity Steps Sets the adjustment steps for ISO sensitivity. 1 EV Step p.38
3. AE-L with AF Locked
Sets whether to lock the exposure value when the focus
is locked.
Off -
4. Link AE and AF Point
Sets whether to link the exposure and AF point
in the focusing area during multi-segment metering.
Off p.38
5. Bracketing Order Sets the order for Exposure Bracketing shooting. 0 - + p.45
6. WB When Using Flash Sets the white balance setting when using flash.
Auto White
Balance
p.50
Menu Item Function Default Setting Page
e_kb560_om.book Page 21 Friday, August 22, 2014 7:35 AM