Pentax QS-1, Operation Manual

Page: 47 / 110

3
Sh
oo
ting
45
1
Press
D
in standby mode.
The Drive Mode screen appears.
2
Use
CD
to select
Q
and
press
B
.
3
Use
CD
to select
Q
,
R
or
S
and press
E
.
The camera returns to standby mode.
The self-timer lamp blinks.
4
Press the shutter release button halfway.
5
Point the remote control unit towards the remote
control receiver on the front or back of the camera,
and press the shutter release button on the remote
control unit.
t
Memo
• The maximum operating distance of the remote control unit
is approx. 4 m from the front of the camera and approx.
5 cm from the back of the camera.
• To use the remote control unit to adjust the focus,
set in [9. AF with Remote Control] of the
E
2 menu.
• When using the Remote Control Waterproof O-RC1,
the autofocus system can be operated with the
q
button.
The
r
button cannot be used.
1
Press
D
in standby mode.
The Drive Mode screen appears.
2
Use
CD
to select
T
and press
B
.
3
Use
CD
to select
T
or
U
and press
B
.
4
Set the bracket value.
The bracket value can be set in
increments of 1/3 EV.
Available operations
5
Press
E
.
The camera returns to standby mode.
t
Memo
• You can set the bracketing order in [5. Bracketing Order]
of the
E
1 menu.
Remote Control Shooting
Remote Control Remote Control
Cancel Cancel OK OK
OK MENU
Exposure Bracketing
V
Changes the bracket value.
J

V
Adjusts the exposure compensation
value.
M
Resets the adjustment value
to the default setting.
Exposure Bracketing Exposure Bracketing
Cancel Cancel
+0.3EV +0.3EV
OK OK
OK MENU
e_kb560_om.book Page 45 Friday, August 22, 2014 7:35 AM