EN-33
Using the Flash
The flash is designed to function automatically when lighting conditions require the use of flash. You can take
an image using a desired flash mode to suit your circumstances.
1. Rotate the mode dial to
,
,
,
,
or
.
2. Press the power switch to turn on the power.
3. Press the four-way controller (
W
/
). The flash mode changes
each time the button is pressed. You can also change the setting
using the four-way controller (
ST
).
4. Press the
button to confirm the setting.
5. Compose your scene and press the shutter release button.
The camera has four flash modes as below.
Flash mode
Description
Auto
The flash discharges automatically according to the photographic conditions.
Auto + Red-eye
This mode reduces the phenomenon of red eyes caused by the light from the
flash being reflected in the subject’s eyes. The flash discharges automatically.
Flash On
The flash will always discarge regardless of the surrounding brightness.
Flash Off
The flash will not discharge, regardless of the brightness. Use this mode to take
pictures at dusk or in museums etc. where flash photography is prohibited.
OK :
OK :
OK :
Flash Mode
Flash Mode
Auto
Auto
Flash Mode
Auto
