26
Using the Built-in Flash
If you wish to discharge the flash in a dark or backlit location, press the
K
button to pop up the flash.
1
Press the
K
button.
The built-in flash pops up and begins
charging. When the flash is fully
charged,
E
appears in the LCD panel
and viewfinder.
2
Press the shutter release button halfway.
The focus indicator
]
appears in the viewfinder when the camera is in focus.
3
Press the shutter release button fully.
The picture is taken.
4
Push down on the portion
indicated in the illustration to
retract the flash.
For further information on how to use the flash, refer to the Operating Manual
(p.135 - 151).
• When the mode dial is at
B
, the flash is not discharged when the lighting
conditions do not require flash for correct exposure even if the flash is popped
up.
• The Flash On mode is used when the flash is popped up if the mode dial is
at a setting other than
B
.
Summary of Contents for K20D - Digital Camera SLR
Page 2: ......
Page 31: ...MEMO 31 ...