21
Transferring your
Images to the Computer
B e f o r e i m a g e t r a n s f e r , p l e a s e r e a d t h e
following guideline carefully.
System Requirements
Pentium 166 MHz processor or higher
Windows 98/2000/Me
Available USB port
At least 32 MB RAM
80 MB available hard disk space
CD-ROM drive
Appropriate color monitor
VGA card
Software Installation
For Users of Windows 98 and 2000/ME
If you are planning to transfer your images into
your PC and edit images, make sure to complete
the driver and software installation before connect-
ing the camera. Follow the steps on this page.
1. Insert the software CD-ROM disc S-SW4 into
CD-ROM drive.
2. Right click on START, and then left click on
EXPLORER.
3. Left click on the S-SW4 (R) icon.
4. The files of PhotoSuite IIISE, PhotoVista and
USB driver appear.
5. Left click twice for your desired file for
installation. The file will be opened.
6. Left click twice on Setup exe for instillation.
Follow the on screen instructions to com-
plete the software installation.
Acquiring Images
For Users of Windows(98/ME/2000)
Follow the steps below transfer your images
to the computer.
1. Left click twice the my computer icon on your
desktop to open the my computer.
2. Connect one end of the USB cable (I-USB4) to
your PC.
3. Turn the camera ON and set the mode dial to
PC.
4. Connect the other end of cable to the camera.
5. A Removal Disk appears.
6. Drag and drop the images in the above men-
tioned drive to the other directories desired.
Editing and Processing Images
Using the software S-SW4 for MGI PhotoSuite
and MGI PhotoVista, follow the instruction of
HELP on screen.
Summary of Contents for EI 100 - Digital Camera - 1.3 Megapixel
Page 1: ......
