Pentax 205571 - PocketJet 3 Plus B/W Direct Thermal Printer, User Manual

Page: 22 / 98

Select “Prompt” for Win 9x or “Roll Paper Pause” for Win 2k/XP for
Paper Source on the “Paper” tab within the printer properties control
panel. This setting causes a dialog to be displayed before EVERY
printed page, including the first one.
Perforated Roll Paper
1. Select “End of Page” mode.
2.
Select “Perf Letter” or “Perf A4” paper size. This is very
important because the printable area is smaller when using
perforated paper compared to cut sheet paper.
WinCE Note: Check the “Perforated Paper” box.
Windows 2000/XP Note: Set “Paper Type” to “Perforated Roll.”
This modifies the printable area for any paper size including
custom sizes. This way you are not limited to “Perfletter” and
“PerfA4” sizes.
Windows Advanced Features Using the
Pentax Configuration Utility
ƒ
Auto-On
ƒ
Auto-Off
ƒ
Pre-feed
These features can be accessed through Windows by using the Pentax
Configuration Utility. Please see the Utility Installation instructions on
page 18 and specific definitions of Auto-On, Auto-Off, and Pre-feed
on pages 27 and 28.
Page 12