Pentax 19271 - Optio W30 7.1 MP Digital Camera Page 24 Operating Manual Download

Page: 24 / 212

Getting Started

Powering the Camera

Use the battery charger to charge the battery before using it in the

camera for the first time or after a long period of non-use, or when the

[Battery depleted] message appears.

Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord,

rated 125 V, 7A, minimum 6ft (1.8m)”

Connect the AC plug cord to the battery charger D-BC63.

Plug the AC plug cord into the power outlet.

Place the battery in the charger so that the PENTAX

logo is facing up.

The charging indicator lights red while the battery is charging and turns

off when charging is finished.

Remove the battery from the battery charger when

charging is finished.

Charging the Battery

• The time required to fully charge the battery is about 120 minutes (max.). The

appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F
to 104°F). (The charging time may vary depending on the ambient
temperature and charging conditions.)

• The battery has reached the end of its service life when it starts to run down

soon after being charged. Replace with a new battery.

• Do not use the battery charger to charge batteries other than the rechargeable

lithium-ion battery D-LI63, as the charger may overheat or be damaged.

• If the battery is inserted correctly but the charging indicator fails to light, the

battery may be faulty. Replace with a new battery.

Battery charger

Charging indicator

Battery

To power outlet

AC plug cord

While charging:

Lights red

Charging finished:

Turns off

Summary of Contents for 19271 - Optio W30 7.1 MP Digital Camera





















































































































































































































Search results

Summary of Contents for 19271 - Optio W30 7.1 MP Digital Camera

Reviews:

Related manuals for 19271 - Optio W30 7.1 MP Digital Camera

Brands by name

Popular brands

Pentax 19271 - Optio W30 7.1 MP Digital Camera, Operating Manual

Search results

Summary of Contents for 19271 - Optio W30 7.1 MP Digital Camera

Reviews:

Related manuals for 19271 - Optio W30 7.1 MP Digital Camera

Brands by name

Popular brands