Pentax 16101, Operating Manual

Page: 132 / 264

130
3
Ta
king
Pict
ures
In k (Interval Movie) mode, you can record multiple still pictures taken
at a certain interval from a set time, and save them as a movie file.
Specify the following settings.
1
Press the four-way controller (
3
) in
A
mode.
The Capture Mode Palette appears.
2
Use the four-way controller (
2345
) to select
C
(Movie) or
V
(Underwater Movie).
3
Press the four-way controller (
2
).
The [Drive Mode] screen appears.
4
Use the four-way controller (
45
)
to select
k
and press the
4
button.
The current settings for interval shooting
appear for approximately 1 minute. To
record movies with the current settings,
proceed to Step 12.
Recording a Movie from Pictures Taken at a Set
Interval (Interval Movie)
Interval
You can set the interval to 1 minute, 5 minutes, 10 minutes, 30
minutes or 1 hour.
Total Time
Set the total recording time from 10 minutes to 359 hours. The total
time and settable units (p.128) vary depending on the [Interval] setting
and movie frame rate (p.132).
Start Delay
Set the start delay from 0 minutes to 24 hours. The start delay can be
set in increments of 1 minute for a delay time up to 59 minutes, and
increments of 1 hour for a delay time longer than one hour. When set
to 0 min., the first picture is taken as soon as the shutter release
button is pressed.
OK O K O K O K
I n t e r v a l S h o o t I n t e r v a l S h o o t I n t e r v a l S h o o t
D r i v e M o d e D r i v e M o d e D r i v e M o d e
MENU C a n c e l C a n c e l C a n c e l