Pentashot FLP 15, Operating Instructions Manual

Page: 8 / 16

8
Complete solution
SETTING THE TRIGGER POSITION
After loosening the screw (A) you can change the position of the trigger
forward
or
backward
.
After loosening the screws (B) you can change the position of the trigger
upwards
or
downwards
.
SETTING THE TRIGGER WEIGHT AND TRAVEL
Second stage weight
The second stage weight is already exactly adjusted by the manufacturer and it is not recommended
to change it. In case you still need to change its setting, carry out the following:
• Turn the screw (11) counterclockwise by one turn.
• Load the simulator by means of the lever.
• Turn the screw (11) very slowly clockwise untill simulator shoots by itself.
• Turn the screw (11) counterclockwise by one ¼ turn.
By this, the second stage weight is set. Check the correct function by few shots.
First stage weight
Turning the screw (12) clockwise increases the first stage trigger weight. Turning the screw (12)
counterclockwise reduces the first stage trigger weight.
First stage travel weight
Turning the screw (13) clockwise increases the first stage travel weight. Turning the screw (13)
counterclockwise reduces the first stage travel weight.