Pentair VFD-4000 Product Manual Download Page 11

20   I   

VFD-4000

I

VFD-4000

  I   21

VFD-4000

VFD-4000

Alarm logs

Alarm logs

Alarm Logs

Alarm interface description

• Press         /         

 

simultaneously can check alarm logs.

Records 32 alarm logs.

The cumulative number of record alarm types

and alarm generation pressure.

: See cumulative record
: Return to main screen

Alarm Logs

Display

Content

Default

Fuse Open Trip

Return the product back to your
local distributor.

Over Heat Trip

Check the fan condition of the inverter.

Over Current (Arm Short)

Check if the motor power corresponds 
with the motor output power. 
Or Increase the accel. time.

External Trip

Return the product back to your
local distributor.


Operatio

 

n Time (hour)

Power  on T ime (hour)

/
/

MODE

ENT

Overvoltage Trip

Check input voltage. 
Check if the required breaker is within 

Overcurrent Trip

Check if the motor power corresponds 
with the motor output power. 
Or Increase the accel. time.

NTC Trip

Return the product back to your local 
distributor.

Input Phase Trip

Check the input wiring. Check the
magnetic contactor on the input side.

Output Phase Trip

Check the output wiring. Check the 
magnetic contactor on the output side.

Ground Fault Trip

Check the output wiring. Reduced the 
load or operation frequency.

V.F.D Overload Trip

Check if the inverter corresponds with
the motor capacity indicated on the
motor nameplate.

Overload Trip

Check if the motor is overloaded.

Safety

Displayed when at least one of the two
safety input signal is off.

Low Voltage

Check the input power.

65 E-Thermal Trip
66 Underload Trip
67 Option Card Fail
68 Motor Fail Trip
69 External Brake Trip
70 IO board fail
71 Pre PID Fail
72 Parameter Write error
74 FAN Trip
75 PTC (Thermal Sensor) Trip
77 MC Fail Trip

Return the product to the local 
distributor.

Summary of Contents for VFD-4000















Reviews: