Description
SOLEO CL is the brain of the system. SOLEO calculates automatically and controls the operating time of each
piece of the equipment.
Filtration control:
- By calculating the time according to the pool temperature (automatic mode).
- By programming a 24 hour cycle (makes it possible to benefit from off hours).
- By integrating the frost protection function (activation of the filtration below 3°C, modifiable value).
- Possibility to select the start time and end time of the filtration in automatic mode (to prevent noise at night).
- Possibility to increase or reduce the filtration time according to the use of the swimming pool (economical
mode = pool with a low number of visitors, turbo mode = pool with a high number of visitors) or by d or
- 30% (value can be adjusted).
- Possibility to change into “SHOCK” mode (forcing of the filtration and electrolyser for 24 hours).
Control of a disinfectant dosing pump or brominator:
- By integrating the information supplied through the amperometric probe.
Control of a pH pump:
- By integrating the information supplied through the pH probe.
SOLEO CL also makes it possible to visualise, on its screen (in the technical room):
- The instant pool information (free chlorine level, water level [pH + RedOx as options]).
- The functioning durations of the filtration and disinfection from the current day (since midnight) and from
the previous day.
- The functioning durations of the filtration and disinfection from the previous day (full 24 hours).
Therefore, in summer and winter, you no longer need to worry about your filtration and you limit the interven
-
tions in the technical room to a bare minimum.
Functions
- Receiving and processing information:
The probes supply the information required for regulating SOLEO CL; indeed, at the end of a dosing
(disinfection, addition of a pH regulator), the probes send a value which makes it possible for SOLEO CL to
refine its settings.
- Control of the equipment in the technical room:
SOLEO CL supplies the dry contacts to which the classic equipment of the technical room is connected
(filtration pump, disinfectant [electrolyser, dosing pump], pH pump).
Please do not use the individual automations of the equipment. SOLEO CL will start/stop the devices.
If SOLEO CL is linked to a SPEEDEO, the activation duration of the filter is managed by SOLEO CL, while the
VS pump speeds are managed by SPEEDEO (depending on the events).
- Access to information in the technical room:
- SOLEO CL supplies the information on a backlit display.
05
