background image

ii

IMPORTANT WARNING AND SAFETY INSTRUCTIONS 

 

‘LIL SHARK

™ 

Aboveground Pool Cleaner Installation and User’s Guide

Stop pump

 before attempting to clean unit. 

Do not allow swimmers in pool while pool cleaner 

is operating.

To reduce the risk of injury, do not let children use 

or play with pool cleaner.

Do not allow swimmers in the pool while pool cleaner 

is operating. Hose can trip or entangle

swimmers which could result in drowning.

Attention Installer:

 

This guide contains important information about the 

installation, operation and safe use of this product. This information should 

be given to the owner and/or operator of this equipment after installation 

of the pool cleaner.

Attention User: 

This manual contains important information that will help 

you in operating and maintaining this pool cleaner. Please retain it for future 

reference. Consult Pentair with any questions regarding this equipment.

Important Notice: 

Before installing this product, read and follow all 
warning notices and instructions which are included. 

Failure to follow safety warnings and instructions can result in severe 

injury, death, or property damage.  Call (800) 831-7133 for additional free 

copies of these instructions.

Consumer Information and Safety

Pentair pool cleaners are designed and manufactured to provide many 

years of safe and reliable service when installed, operated and maintained 

according to the information in this manual. Throughout the manual, safety 

warnings and cautions are identified by the “       ” symbol. Be sure to read 

and comply with all of the warnings and cautions.

 

HAZARDOUS SUCTION.

 

Do not play with cleaner or hose or apply to body. 

Can trap and tear hair or body parts. Hose can trip or 

entangle swimmers which could result in drowning. 

General Installation Information

Pre-Installation Check List

Before installing your cleaner, review and understand all warnings and 

safety information in this guide. Failure to follow these instructions or 

improper installation of the cleaner can result in damage to the pool 

finish or the vinyl liner, Pentair Aquatic Systems disclaims any liability for 

repairs or replacement to any of these structures or components of the 

customer’s pool.

Before installing the cleaner in a vinyl liner pool:

Check liner closely for signs of deterioration or damage from age, 

chemicals, pool wall damage, etc. If any damage is found, have a qualified 

pool professional make all the necessary repairs. Also, if there are stones, 

roots, etc., under the liner, remove them before installing the cleaner.

Before installing the cleaner in a gunite pool or a pool that is partially 

or completely tiled:

Repair loose tiles and tighten any loose light rings.

Before installing the cleaner, clean your filter system:

Make sure you have cleaned the filter, including backwashing, rinsing, 

and emptying all baskets. A clean system is necessary for proper cleaner 

operation and coverage.

Before installing the cleaner, understand cleaner coverage:

The cleaner is designed to rid your pool of debris in approximately 4-6 

hours. Less time could be needed, depending on the pool size. The 

cleaner was not designed to automatically clean steps or swimouts or to 

work under a solar cover. It was also not designed to do initial cleanup 

for a new pool or when opening your pool for the season.

AFTER installing the cleaner, make sure the cleaner is operating 

correctly :

The cleaner may need some minor adjustments to make sure it is 

operating properly so there is no damage to the pool finish. Certain 

vinyl liner patterns are particularly susceptible to surface wear, pattern 

removal, ink rubbing off of, or serious scratches to the pattern caused by 

objects coming into contact with the vinyl surface, including automatic 

pool cleaners. Pentair Aquatic Systems is not responsible for any pattern 

removal, abrasions or markings on vinyl liners.

Moving parts may injure hands or fingers. Stop pump 

before attempting to clean out pool cleaner head.

SUCTION ENTRAPMENT, INJURY, AND 

DROWNING HAZARD.

 If your pool has a dedicated 

suction port (“vac port”) for vacuuming or for an 

automatic pool cleaner, it must be covered when 

not in use. A spring loaded safety cover (a “vac port 

fitting”) is included with your cleaner. Install it on the 

suction port to prevent entrapment and injury. If the 

cover provided does not fit, purchase one that does 

from your local pool store and install it instead. The 

cover should conform to IAPMO SPS4-99A.

Warnings and safety instructions for Pentair Aquatic Systems

pumps and other related products are available at:

http://www.pentairpool.com/pool-owner/safety-warnings/

 or call

(800) 831-7133 for additional free copies of these instructions.
Please refer to 

http://www.pentairpool.com/pool-owner/

safetywarnings/

 for warning and safety instructions related to 

this product.

ENGLISH

Summary of Contents for KREEPY KRAULY LIL SHARK











Reviews: