Pentair IntelliCenter 522039Z, Installation Manual

Page: 4 / 12

4
IntelliCenter Control System Expansion Card and Pool Cover Installation Guide
IntelliCenter Control System Expansion Card and Pool Cover Installation Guide
Pool Cover Installation
The IntelliCenter Control System Pool Cover Expansion card can support two pool covers.
For more information, refer to your pool cover manufacturers owner’s manual for wiring instructions
.
The pool cover controller provides the interface to the IntelliCenter Control System. The pool cover
controller is self powered and mounts to the non-motor end of an automatic safety cover mechanism.
Connecting the Rotary Encoder to the IntelliCenter Control System Pool Cover
Expansion Card
1. Connect the pool cover controller 2-wire (Black and White) to the
Pool Cover 1
, 2-pin digital input
screw terminals on the IntelliCenter Control System Pool Cover Expansion card.
See Figure 2.
2. Connect the black and white wires from the pool cover controller into one of the two Pool Cover
digital inputs. See Figure 1.
Pool Cover Expansion Card
(P/N 522975)
1 2 3 4
ON C&K SD
A 04
DIGIT
AL INPUTS
ANALOG INPUTS
Figure 1. Rotary Encoder 2-wire connector
Not Used
Figure 2. Pool Cover Expansion Card
Connect pool cover
controller Black and
White wires to
Pool Cover 1
(Digital Inputs)
Note: The following pool cover installation instructions described below may not be
the same for your pool cover equipment. Please refer to your pool cover
manufactures documentation for specific details.
Connecting the Pool Cover Controller to IntelliCenter
™
Control System
Expansion Card
Black
White
Pool Cover 1