Pentair IntelliCenter 522039Z, Installation Manual

Page: 1 / 12

1
IntelliCenter Control System Expansion Card and Pool Cover Installation Guide
IntelliCenter Control System Expansion Card and Pool Cover Installation Guide
INTELLICENTER
™
CONTROL SYSTEM
POOL COVER EXPANSION CARD AND POOL COVER INSTALLATION GUIDE
Slot 1 is only used for a Personality card such as: i5PS, i8P, i8PS, i10P, i10PS, or i10D . If no Personality
card is being used, Slot 1 can be used for a Pool Cover Expansion Card or Valve Expansion Card.
Note: Only one Personality Expansion Card can be installed in one enclosure.
Note: For more information,
please refer to the IntelliCenter Control System Installation Guide (P/N 522989).
Slot 2, Slot 3 and Slot 4: These Expansion card slots are available for any remaining Expansion cards in
any order, including the Pool Cover Expansion card or Valve Expansion card. See figure 1.
Note: Slot assignment order is the same for IntelliCenter Expansion enclosures.
IntelliCenter Control System Pool Cover Expansion Card (P/N 522039Z)
The IntelliCenter Control System Pool Cover Expansion card can support two pool covers. Refer to
your pool cover manufacturer’s owner’s manual for wiring instructions. Note: For pool cover installation
instructions, see page 4.
INSTALLATION SUMMARY STEPS
1. Access the Main Motherboard in the Load Center or Power Center (see page 2).
2. Install the Pool Cover Expansion Card SLOT 1 (if available) next to the Main Motherboard or
in SLOT 2, SLOT 3, or SLOT 4 (see page 3).
3. Wiring the Pool Cover Expansion Card.
4. Use the Setup Wizard to configure the system (see IntelliCenter User’s Guide (P/N 522990)
i5P Main Motherboard
Slot 1: Personality Expansion Card.
Note: Personality Expansion cards MUST always be installed in SLOT 1.
Slot 2: Valve Expansion Card or Pool cover Expansion Card
Slot 3: Valve Expansion Card or Pool cover Expansion Card
Slot 4: Available for future use
Expansion Card Slot Assignment Order
(*) Slot 1:
Pool Cover
Expansion
Card
Slot 2:
Expansion
Card Slot 3:
Expansion
Card (available) Slot 4:
Expansion
Card (available)
i5P (Base System)
Main Motherboard
Expansion
Card
3
Expansion
Card
4
Pool Cover Expansion Card
(P/N 522975)
1 2 3 4
ON
C&K SD
A 04
Pool Cover 2
Pool Cover 1
5V Power
Source
Figure 1: IntelliCenter Control System with Pool Cover Expansion Card Installed (i5P Main Motherboard)
Note: Use SLOT 1 for Pool Cover Expansion Card if no Personality Card is being used,
otherwise use SLOT 2, 3, or 4.
P/N 523457 Rev. C 8/2020