Pentair INTELLIBRITE 5G, Installation And User Manual

Page: 6 / 164

INTELLIBRITE
®
5G Pool and Spa Lights Installation and User’s Guide
Powering on IntelliBrite
®
5G Color Lights
2
When the IntelliBrite light is powered on, a momentarily white light will illuminate,
followed by the previously selected color. Note: If power to the light is off for more
than five (5) seconds, the last color show mode or fixed color that was saved will be
displayed.
Selecting a light show mode or fixed color
Switch power on to the light. A white light will momentarily illuminate, followed by the pre-
viously selected color. To select a color show mode (1-7) or fixed color (8-12), turn the wall
switch off/on a specific number of times. Each number (1-12) shown below corresponds to
the number of times to power-cycle the switch to activate a color light show or fixed color.
For details about saving color effects while in “show” modes, see “Hold” and “Recall” fea-
ture on page 4. Example: To select California Sunset Mode; turn the light on, then turn off
and on six times. During the off/on switching process, no illumination will occur,
Saving a Color Mode or Fixed Color: When power is switched off to the IntelliBrite
color lights, the last color show mode or fixed color will be saved. The next time the light
is powered on, the previously saved color show mode or fixed color will be displayed.
For example, while in “Party Mode” switch the light off. Wait more than 10 seconds,
switch the light back on to resume “Party Mode.”
During the off/on switching process, before the selected color is displayed,
no illumination will occur for a brief second. This operating
mode is normal during the switching process. During this period the pool and spa will be
dark and precautions should be taken to avoid unforeseen accidents. Failure to observe
this warning may result in serious injury or death to pool and spa users.
1 SAm Mode: Cycles through
white, magenta, blue and
green colors (emulates
the Pentair SAm® color
changing light).
2 Party Mode: Rapid color
changing building energy
and excitement.
3 Romance Mode: Slow
color transitions creating a
mesmerizing and calming
effect.
4 Caribbean Mode: Transitions
between a variety of blues
and greens.
5 American Mode: Patriotic
red, white and blue
transition.
6 California Sunset Mode:
Dramatic transitions of
orange, red and magenta
tones.
7 Royal Mode: Richer, deeper
color tones.
8 Blue: Fixed color.
9 Green: Fixed color.
10 Red: Fixed color.
11 White: Fixed color.
12 Magenta: Fixed color.
13 Hold: Save the current color
effect during a color light
show.
14 Recall: Activate the last
saved color effect.
Number of times to c
yc
le po
wer (1-5)
Number of times to c
yc
le po
wer (6-14)
Using the IntelliBrite Controller (sold separately, P/N 600054), IntelliBrite 5G color pool/spa
lights can all be synchronized so that individual or multiple IntelliBrite lights all lights can be
switched on and off together.
Using an IntelliBrite Color Light Controller