−
4
−
87568919
E
2006 Hoffman Enclosures Inc.
INSTALLATION STEPS
Step 1
−
Swing panel may be hinged on any
side. Determine mounting position desired and
drill eight .312 (8mm) diameter holes as shown
on page 6.
Step 2
−
Mount hinges and securing brackets
using pan head screws with nylon washers un-
der the screw heads. In order to meet NEMA 4
and NEMA 12 standards, nylon washers must
be used.
Step 3
−
Mount swing panel to hinges with 3/8”
hex head bolts, lockwashers, and hex nuts. Ad-
just panel until panel swings freely through the
door opening.
Step 4
−
Captivate thumb screws to panel using
retaining rings provided.
Step 5
−
On larger enclosures or with heavy
panel loading, be sure to drill two holes in swing
panel and install two bolts per hinge as shown.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-7425-Hoffman-ANADFK-Swing-Out-Panel-Kit-12x12.aspx
