Click Disconnect to terminate communications with the currently connected sensor.
The Sensor Setup screen allows the user to
select between analogue or serial output; it also
lets the user adjust the number of averaging
points. Click advanced button to access more
configuration items and to re-calibrate sensor.
Depending on the default factory setup, the
sensed pressure is output as 4-20mA signal or 0-
2.5V signal
The sensed pressure is output as digital data and
displayed on screen, together with current
temperature.
.
This sets the level of averaging. Lower levels of averaging will decrease response times but may also increase
the level of noise. The factory default is 120 which give a response time of approximately 1 second.
