Installer manual Fleck 5800 XTR - Operation
92 / 126
Ref. MKT-IM-006 / E - 12.11.2019
8.6
Remote lockout
If a remote switch is installed, the controller will not allow the system to go into regeneration until
the regeneration lockout input signal to the controller is cleared. This requires opening the
contact closure to clear the lockout condition. The recommended gauge wire is 20 with a
maximum length of 500 feet. See Electrical connections [
8.7
Sleep mode
The controller will go into sleep mode if no button is pressed after five minutes. All other
controller functions will continue to operate. The display will wake from sleep mode when any part
of the display is touched.
