Installer manual Fleck 2850 SXT - Maintenance
Ref. MKT-IM-030 / C - 12.05.2020
75 / 104
9.4.2
Power head and/or motor replacement
1. Using a flat screwdriver, unscrew (
2
) and open the cover (
1
).
2. Open the controller (
3
).
3. Using pliers, remove the circlip (
11
) and free the arm (
4
).
4. Using a flat screwdriver or a 11 mm wrench remove (
10
).
5. Using a 19 mm wrench, remove (
9
) the motor (
6
) and the power head (
5
).
6. Remove the microswitches (
7
) and cams (
8
), see Micro-switches replacement, and Cams
7. Replace the motor (
6
) and/or the power head (
5
).
8. Reverse above procedure steps to rebuild.
