background image

Rev. C  10-31-02

1

P/N  520044

 Model EZ3400 EasyTouch

 

Owner’s Manual

4-Function Hand-Held Wireless Remote Control

Important Notice

Attention Installer.

This manual contains important information about the installation, operation and safe use of this
product. This information should be given to the owner/operator of this equipment.

Before installing this product, read and follow all warning notices and instructions which are included.
Failure to follow safety warnings and instructions can result in severe injury, death, or property damage.
Call (800) 831-7133 for additional free copies of these instructions.

WARNING

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Pentair Pool Products

1620 Hawkins Ave., Sanford, NC 27330 • (919) 774-4151
10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400

WARNING

Risk of electrical shock or electrocution. If your Compool electrical panel includes circuit breakers
(almond colored steel enclosure), it is also required that the main power into the home be switched
off at the main circuit breaker box.

Table of Contents

SECTION I.

APPLICATION ................................................................................................................................ 2

SECTION II.

KIT CONTENTS ............................................................................................................................. 2

SECTION III.

RECEIVER .................................................................................................................................... 2

SECTION IV.

POWER CENTER .......................................................................................................................... 2

SECTION V.

CABLE SPLITTERS (Optional) ...................................................................................................... 3

SECTION VI.

HAND-HELD REMOTE ................................................................................................................... 3

SECTION VII.

RECEIVER CIRCUIT BOARD ........................................................................................................ 3

SECTION VIII. RECONFIGURING FUNCTIONS ON THE HAND-HELD REMOTE ................................................. 4

SECTION IX.

CUSTOMIZING THE COMMUNICATION LINK ............................................................................... 5

SECTION X.

HAND-HELD REMOTE BATTERY REPLACEMENT ....................................................................... 5

TROUBLE-SHOOTING ................................................................................................................... 6

WARRANTY ................................................................................................................................... 7

Summary of Contents for EZ3400 EasyTouch









Reviews: