1 / 2
RTD50CS
RTD TEMPERATURE SENSOR FOR TEMPERATURE MEASUREMENT TO 400°F (204°C)
INSTALLATION INSTRUCTIONS
THERMAL MANAGEMENT SOLUTIONS
EN-DigiTraceRTD50CS-IM-H58856 01/13
DESCRIPTION
The RTD50CS is a 50-foot three-wire platinum RTD (resistance
temperature detector) used with monitoring and control systems,
such as our DigiTrace C910 or ACCS-30 controllers.
The RTD50CS can be installed directly to the controller using the
supplied 1/2-inch conduit fitting or to an RTD junction box where
RTD extension wire is used.
TOOLS REQUIRED
ǩ PPIODWEODGHVFUHZGULYHU
ADDITIONAL MATERIALS REQUIRED
ǩ $7DOXPLQXPWDSH
KIT CONTENTS
Qty Description
1 RTD
temperature
sensor
This component is an electrical device. It must be installed
correctly to ensure proper operation and to prevent shock or
fire. Read these important warnings and carefully follow all the
installation instructions. Component approvals and performance
are based on the use of s pecified parts only. Do not use substitute
parts or vinyl electrical tape to make connections.
WARNING:
Extension Wires
Wire size
(each of 3)
20 AWG, stranded tinned copper
Wire insulation
rating
YROWV
Length
IHHWPIOH[LEOHDUPRULQPP
lead wire
Outer shield
Stainless steel flexible armor
Maximum exposure
temperature
r)r&
Conduit bushing
½ in NPT
APPROVALS
$SSURYDOVDVVRFLDWHGZLWKWKHFRQWUROGHYLFH
SPECIFICATIONS
Sensor
Housing
316 stainless steel
Dimensions
LQPPOHQJWKLQPPGLDPHWHU
Sensing area
1½
LQPP
Accuracy
sr)r&DWr)r&
Range
Ǟr)WRr)Ǟr&WRr&
Resistance
RKPVDWr&
α
RKPVRKPr&
