COLORCASCADE
®
Color Pool and Spa Light Installation and User’s Guide
COLORCASCADE
®
Color Pool and Spa Light Installation and User’s Guide
Example:
To select
California Sunset Mode
; First switch power on to the light; the
previously selected color is displayed, unless the HOLD or RECALL feature was previously
enabled, then turn the switch off and on six (6) successive times. During the Off/On
switching process, no illumination will occur.
Saving a color mode or fixed color
When power is switched off to the ColorCascade
®
lights, the last color show mode or fixed
color will be saved. The next time the light is powered on, the previously saved color show
mode or fixed color will be displayed. For example, while in Party Mode switch the light off.
Wait more than 10 seconds, switch the light back on to resume Party Mode.
NOTE: During the off/on switching process, before the selected color
is displayed, no illumination will occur. This operating mode is normal
during the switching process. During this period the pool and spa will be
dark and precautions should be taken to avoid unforeseen accidents.
Failure to observe this warning may result in serious injury or death to
pool and spa users.
Random Mode
The ColorCascade
®
Light has an additional Random Mode. In Random Mode the lights
will randomly transition through the same color palette as in IntelliBrite Mode at a similar
speed to the IntelliBrite Mode. For an example, IntelliBrite American Mode lights up only
in red white and blue and when the IntelliBrite Random Mode is turned on and the light
is set to American Mode it will display red, white and blue, but randomly. The speed of the
transitions is also tied to the IntelliBrite Mode. Sam Mode will change colors slowly and
Party Mode will change more rapidly.
Activating IntelliBrite Random Mode:
To toggle IntelliBrite Random Mode On or Off
you need to enter Party Mode(Off-On-Off-On), wait until the lights come on and then enter
Party Mode a second time (Off-On-Off-On) with less than 30 seconds between them.
Resetting All Lights:
To Reset all the lights you need to enter Party Mode four (4) times
with less than 30 seconds between them. This will turn IntelliBrite Random Mode OFF.
This is needed because should two lights ever get into different states, toggling their
states will never fix the problem.
4
