#2
Minimum Install
Torque 35ft-lb(50N-m)
#4
Remove set Screw
#5
Rotate to
adjust height
Press V-bolt
against pipe
Replace set screw-
(hand tighten)
Hand Tighten
#6
Accepts 1/2" fastener for recommended 3/8"
DROP-IN-ANCHOR CADDY CA0037EG. Holes
can be drilled out to accept larger fasteners.
#3
Installation Steps
#1
TECHNICAL SUPPORT:
www.erico.pentair.com
CFS565_B
INSTRUCTION SHEET
2 OF 2
© 2017 Pentair All Rights Reserved
Pentair, CADDY, ERICO CADWELD, ERICO CRITEC, ERICO, ERIFLEX, and LENTON are owned by Pentair or its global affiliates. All other trademarks
are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.