background image

p 01

p 02
p 05
p 06

p 08

Warning & Caution

  This guide provides installation and operation instructions for BlueStorm. Consult Pentair with any questions regar-

ding this equipment .

Attention User: This manual contains important information that will help you in operating and maintaining this product. 

Please retain it for future reference. WARNING: Operators shall be adequately instructed on the use of these machines

   DO NOT ENTER THE POOL WHILE THE POOL CLEANER IS WORKING 

  DO NOT ALLOW CHILDREN TO USE OR PLAY WITH THE CLEANER 

SAFETY

- The unit must be supplied through a residual current device (RCD) having a rated residual operating current not 

exceeding 30 mA

- A Ground Fault Current Interrupter (GFCI-USA) or a Residual Current Device (RCD-EUROPE) must be installed to 

protect your electric outlet and prevent any possible electric shock.

- Keep the power supply out of standing water

- Position the power supply at least 3m/10ft away from the edge of the pool

- Do not enter the pool while the Pool Cleaner is working

- Unplug the power supply before servicing

- The unit must only be supplied by the provided power supply.

- The connection to the branch circuit should be consistent with the local and national wiring rules (electrical code).

- If the supply cord is damaged, it must be replaced by the manufacturer’s service agent or a qualified and trained 

person in order to avoid hazards.

CAUTIONS

Use the Robotic Cleaner in the following water conditions only:

Chlorine : 

4 ppm max

pH : 

7.0 - 7.8

NaCl :

 < 5000 ppm

Water temperature :

 1 - 34°C / 34-93°F

This Robotic Cleaner cleans flat pool floor or with gentle slope of any finish, no matter how slippery. 

A safety mode prevents the Robotic Cleaner to operate when outside of water.

The machine is also intended for commercial use, for example in hotels, schools, hospitals, factories, shops, offices 

and rental businesses."

MAINTENANCE AND STORAGE 

- Make sure that no water is left in the Pool Cleaner

- Thoroughly clean the filter and let it dry outside of the filter canister.

- Roll up the cable so that it has no kinks

- Store the Pool Cleaner in a protected area out of direct sun / rain / frost, at a temperature of between

- 5°-45°C / 41°-113°F

- DO NOT LUBRICATE

PRESENTATION
> Warning & Caution
INSTALLATION - SPECIFICITES
> Before first use
> Start-Up
> Cleaning
OTHER
> Troubleshooting 

Content

!

!

Summary of Contents for BLUESTORM













Reviews: