371885 (REV 12/2016)
8
English
Assembling the Cleaner
1.
Attach the Quick Connect fitting on the end of the hose to the feed tube on the BLUEFURY
®
LITE Pressure Side Pool Cleaner.
Be sure the snaps are engaged.
2.
Attach the debris bag to the cleaner. Push the bag over vacuum tube to click it into place.
3. Review checklist before use:
•
Hoses cut properly and floats evenly spaced.
•
Mender nuts are tight on feed hose.
•
Wall fitting secure and in place.
•
Debris bag and hose assembly attached.
•
Ensure debris seal is attached. See
Figure 9
.
Using the Cleaner
1. Lower the cleaner carefully into pool.
2. Switch ON the FILTER PUMP.
3. Wait at least 60 seconds to allow air to blow out of the hose.
4. Switch ON the BOOSTER PUMP.
Assembling the Cleaner
Debris Bag
Sweep Hose
Quick Connect Fitting
(with built-in swivel)
Feed Tube
Lead Hose
Mender Nut
Debris Seal
Debris Seal
Figure 9
Feed Tube
Summary of Contents for BLUEFURY LITE
Page 74: ...371885 REV 12 2016 74 ...
Page 75: ...371885 REV 12 2016 75 ...
