Pentair Pool Products IntelliComm Communication Center, Installation Manual

Page: 7 / 16

1
IntelliComm Communication Center Installation Guide
IntelliComm Communication Center
The IntelliComm ® communication center provides automatic control of IntelliFlo ® and IntelliPro ® pumps. The IntelliComm
provides four pairs of input terminal connections. These inputs connectors are actuated by either 15 VAC to 240 VAC or
15 VDC to 100 VDC from the source device such as an automation controller, heater, or heat pump. If more than one input
is active, the highest program number will be communicated to the pump.
Programming Flow Rates (GPM) for IntelliFlo VF and IntelliPro VF
The IntelliFlo VF and IntelliPro VF pump can be programmed to run at a specific US gallons per minute (GPM), for each
external control input.
IntelliFlo VF: 15 - 130 GPM
IntelliPro VF:15 - 130 GPM
Programming Pump Speeds (RPM) for IntelliFlo V
S
+ SVRS, IntelliFlo VS3050
and
IntelliPro VS3050
The IntelliFlo VS+ SVRS, IntelliFlo VS3050 and IntelliPro VS3050 pump can be programmed to run at a specific speed
(RPM), for each external control input.
IntelliFlo V
S
+ SVRS: 1100 - 3450 RPM
IntelliFlo VS3050: 400 - 3110 RPM
IntelliPro VS3050: 400 - 3450 RPM
IntelliComm Communication Center
Attach IntelliFlo communication
cable wires to terminals
11 and 12
Attach incoming
IntelliComm AC power
wires to AC terminals
1 and 2
Ground
terminal
Ground
terminal
Attach control input wires
to terminals 3 through 10