- GW8000
-
Page
13
Installation
STEP 1 - Straighten Hose
Remove hose from box and lay it
out in the sun to straighten.
STEP 2 - Check Parts
Make sure you have all
parts to pool cleaner.
STEP 3
Clean System
A.
While the hose is
relaxing, clean and
backwash your filter
system, skimmer and
pump baskets.
B.
Close main drain if
your pool has one.
C.
Start pump.
STEP 4 - Assemble Cleaner
A.
Insert swivel assembly
into cleaner body and
twist 1/4 turn clockwise to lock.
B.
Set brush
adjuster to ‘0’.
C.
Slide long
hose cuff
over swivel assembly
to install hose.
STEP 5 - Submerge Cleaner
A.
Start pump.
B.
Turn cleaner upside down,
submerge, and feed hose down
side of pool wall to fill hose
with water.
Reducer Cone
Hose
Swivel
Assembly
Vacuum
Regulator
Swivel
Assembly
Long Hose Cuff